Hello all.
New Member here. I have a TDA50 (US version) that i bought on ebay and it came preconfigured with 3 Panasonic desktop phones (KX-DT546) and 5 Panasonic dect wireless phones (KX-WT125) with 3 wireless Cell station (KX-T0155). I went to install it myself without needing any configuration, i maintained the same extension numbers the previous owner had. I only ran the RJ 11 cable and changed the extension names on each phone. I am only using the system as intercom alone and nothing else. Everything was working fine until about 3-days ago when my IT staff decided to reset the PBX because some line were off. According to him he was able to get the 3 desktop phones working by setting up the phones themselves, but the 5 dect wireless phones are only showing "Register Unit" and when he press F for registration, nothing happened. He believed he needed the maintenance console to configure the system to make the dect phones work, and i am not sure about that, but i have downloaded the US version of the software.
So my question are. Does anybody have an idea on how to get the dect phones working again? is the software really necessary to do that since the desktop phones are working? Any help will be appreciated.
The other question, i downloaded v 7.8.1, but i read on this thread of someone offering to upload v 7.8.2, can anybody point me to that link. I am also not available at the facility, so i can not actually help my staff physically.
Thank you all in advance.
